FTN3: FutoIn Interface Definition Version: 1.6 Date: 2017-08-04 Copyright: 2014-2017 FutoIn Project (http://futoin.org) Authors: Andrey Galkin
There is Invoker and Executor side. Both can be implemented in scope of single process, different processes or different machines across network.
Multi-peer communication is assumed to be a higher level concept on top of current one.
Object-oriented remote calls is also assumed to be a higher level concept.
It assumed that there is language- and/or software platform-specific standardized low-level API/ABI for connection establishing and calls coupled with optional standardized high-level binding/mapping of FutoIn interfaces to native features.
All specifications and implementations assume to support loose coupling of each components, suitable for easy separation, replacement and unit testing.
Each call has a request and may have a response messages with key-value pairs described below.
If a call does not expect to return any result then no response message must be
sent and/or expected to be received. It must be possible to override with forcersp
flag in request message.
Note: it means that call must return at least something to detect on invoker if the
call is properly executed
For large data transfer efficiency purposes, if message transport allows such extension, request message can be coupled with raw request data and/or response can be replaced with raw response data. Typical scenario is file upload and/or download through HTTP(S).
Lower-level protocol of message exchange is out of scope of this specification.
Possible examples of Peer-to-peer communication types:
The major parts: function identifier, parameters, result and exception.
Invoker is responsible to enable request message (and response therefore) multiplexing by adding special request ID field. Executor is responsible for adding the same field to related response message.
Please note that Invoker and Client, Executor and Server are NOT the same terms. Client is the peer which initiated peer-to-peer communication. Server is the peer which accepts peer-to-peer communications. On the other hand, Invoker sends request and Executor replies to the request.
Client side request ID must be prefixed with "C". Server side request ID must be prefixed with "S".
The rest of request ID should be integer value starting with 1 and incrementing with every subsequent request sent. However, it should be allowed to add other prefixes to this value.
Note: Request ID must never be used outside of multiplexing context as it by definition duplicates across different communication channels
Invoker/Executor side is semantically defined and does not rely on Client/Server status of peer. There is no protocol-level support for that. Each side controls if it can act as Executor.
It is suggested that Client side is always Invoker in uni-directional pattern.
Both serial and multiplexing modes are allowed.
Each side is both Invoker and Executor. Bi-directional pattern must always work in message multiplexing mode.
Using JSON-SCHEMA:
Schema: futoin-request
{
"title" : "FutoIn request schema",
"type" : "object",
"required" : [ "f", "p" ],
"additionalProperties" : false,
"properties" : {
"f" : {
"type" : "string",
"pattern" : "^([a-z][a-z0-9]*)(\\.[a-z][a-z0-9]*)*:[0-9]+\\.[0-9]+:[a-z][a-zA-Z0-9]*$",
"description" : "Unique interface identifier, version and function identifier"
},
"p" : {
"type" : "object",
"additionalProperties" : false,
"patternProperties" : {
"^[a-z][a-z0-9_]*$" : {}
},
"description" : "Parameters key-value pairs"
},
"rid" : {
"type" : "string",
"pattern" : "^(C|S)[a-zA-Z0-9_\\-]*[0-9]+$",
"description" : "Optional request ID for multiplexing"
},
"forcersp" : {
"type" : "boolean",
"description" : "If present and true, force response to be sent, even if no result is expected"
},
"sec" : {
"type" : "object",
"description" : "Security-defined extension"
},
"obf" : {
"type" : "object",
"description" : "On-Behalf-oF user info",
"additionalProperties" : false,
"properties" : {
"lid" : {
"type" : "string",
"description" : "Local User ID"
},
"gid" : {
"type" : "string",
"description" : "Global User ID"
},
"slvl" : {
"type" : "string",
"description" : "User authentication security level"
}
}
}
}
}
Example:
{
"f" : "futoin.event:1.0:reliableEvent",
"p" : {
"event" : "SomeEvent"
}
}
Using JSON-SCHEMA:
Schema: futoin-response
{
"title" : "FutoIn response schema",
"type" : "object",
"additionalProperties" : false,
"minProperties" : 1,
"maxProperties" : 3,
"properties" : {
"r" : {
"type" : "object",
"additionalProperties" : false,
"patternProperties" : {
"^[a-z][a-z0-9_]*$" : {}
},
"description" : "Result key-value pairs"
},
"e" : {
"type" : "string",
"description" : "Exception/error name. Either r or e must be present"
},
"edesc" : {
"type" : "string",
"description" : "Optional. Error description, if e is present"
},
"rid" : {
"type" : "string",
"pattern" : "^(C|S)[0-9]+$",
"description" : "Optional request ID for multiplexing"
},
"sec" : {
"type" : "object",
"description" : "Security-defined extension"
}
}
}
Example:
{
"r" : {
"delivered" : true
}
}
or
{
"e" : "NotImplemented"
}
The standard FutoIn interface types:
Note: null can be used only as placeholder in "default" values.
Each iface can define own types in the optional "types" fields.
The types are inherited and imported. It is an error to redefine type in such case.
Each custom type must be based on one of the standard types, but can define various optional constraints:
NOTE: omitted optional field of custom map type must be set to null on incoming message (request for Executor and response for Invoker case). Optional fields should be allowed to be sent as null.
As a special case, it's possible to mark any parameter with default value of "null". Besides providing the default value, it also triggers a special parameter verification logic which skips any constraint check, if actual value is null.
Parameter, result variable, field in "map" and type can be defined with string. The string must be a name of a known type.
So,
"param" : "integer"
is equivalent to
"param" : {
"type" : "integer"
}
Sometimes the same parameter or result may be allowed to have different types. For example: database query can return both integer and string field data.
For that purpose, specification allows listing several types in array. Such
approach is supported only in shortcut type definition form, e.g.:
"param" : ["integer", "string"]
Any functional call can result in expected or unexpected errors. This concept is similar to checked/unchecked exceptions in Java language.
All expected exceptions/errors, which appear in standard flow must be enumerated in "throws" clause of function declaration in interface definitions (see below).
Unexpected exceptions/errors are generated by execution environment/condition as reaction to error condition not related to logic implemented in given function. Example: internal communication errors, hit of resource limits, crashes, etc.
If possible, language/platform-specific bindings should enforce Invoker to check for all excepted errors.
It is assumed that both request and response messages are relatively small. All heavy data should be transfered as raw HTTP or other lower level protocol payload. Therefore, a safety limit of 64 KBytes is imposed for any type of payload. Both Invoker and Executor should control this limit, unless there is efficient mechanism with O(1) complexity to transfer message from peer to peer (e.g. shared memory).
It is expected that Executor passes authenticated user information in sub-calls, so all security checks are done against user, but not Executor itself. It is a simple security measure to avoid error-prone access control implementation in sub-calls. If call is expected to be done on behalf of system then it should be controlled by System's Invoker iface option.
Each function can have seclvl defined to control minimum security level of user authentication. It is not related to access control, but user validation, e.g. important functionality may require dual factor or public key based authentication. PleaseReauth is to be triggered on security level mismatch with the first word in description containing required security level.
All unknown security levels are to be treated as maximum level of security.
Executor side functions identifiers are grouped into interfaces, which must have a specifications in FutoIn format. Further, those will be named "spec" for singular or "specs" for plural.
All used specs should be available to Invoker and Executor for dynamic retrieval from special repositories through network. Repository access and format will be described later in this document.
For optimization and reliability reasons, specs can be bundled and/or embedded into Invoker and/or Executor application.
Interfaces must be defined in machine-readable form using JSON. There is existing neutral JSON Schema, but it is universal and therefore too loose for interface definition. Therefore FutoIn defines own JSON structure for interface definition below.
Using JSON-SCHEMA:
Schema: futoin-interface
{
"title" : "FutoIn interface definition schema",
"type" : "object",
"required" : [ "iface", "version", "ftn3rev" ],
"additionalProperties" : false,
"properties" : {
"iface" : {
"type" : "string",
"pattern" : "^([a-z][a-z0-9]*)(\\.[a-z][a-z0-9]*)+$",
"description" : "Unique interface identifier"
},
"version" : {
"type" : "string",
"pattern" : "^[0-9]+\\.[0-9]+$",
"description" : "Version of the given interface"
},
"ftn3rev" : {
"type" : "string",
"pattern" : "^[0-9]+\\.[0-9]+$",
"description" : "Version of the FTN3 spec, according to which the iface is defined"
},
"types" : {
"type" : "object",
"description" : "iface types. Must start with Capital",
"patternProperties" : {
"^[A-Z][a-zA-Z0-9]*$" : {
"type" : ["object", "string", "array"],
"uniqueItems": true,
"minItems": 1,
"additionalProperties" : false,
"properties" : {
"type" : {
"type" : "string",
"pattern" : "^any|boolean|integer|number|string|map|array|enum|set|[A-Z][a-zA-Z0-9]+$"
},
"min" : {
"type": "number"
},
"max" : {
"type": "number"
},
"minlen" : {
"type": "number"
},
"maxlen" : {
"type": "number"
},
"regex" : {
"type": "string"
},
"elemtype" : {
"type": "string"
},
"fields" : {
"type": "object",
"additionalProperties" : false,
"patternProperties" : {
"^[a-z][a-z0-9_]*$" : {
"type" : ["object", "string", "array"],
"uniqueItems": true,
"additionalProperties" : false,
"properties" : {
"type" : {
"type" : "string",
"pattern" : "^any|boolean|integer|number|string|map|array|[A-Z][a-zA-Z0-9]+$"
},
"optional" : {
"type" : "boolean",
"description" : "If true the field is optional. Defaults to null"
},
"desc" : {
"type" : "string",
"description" : "Result variable description"
}
}
}
}
},
"items" : {
"type" : "array",
"uniqueItems": true,
"additionalItems": false,
"items" : {
"type" : ["string", "integer"]
},
"minItems": 1,
"maxItems": 1000
},
"desc" : {
"type" : "string",
"description" : "Custom type description"
}
}
}
},
"additionalProperties" : false
},
"funcs" : {
"type" : "object",
"description" : "Member function declaration",
"additionalProperties" : false,
"patternProperties" : {
"^[a-z][a-zA-Z0-9]*$" : {
"type" : "object",
"additionalProperties" : false,
"properties" : {
"params" : {
"additionalProperties" : false,
"patternProperties" : {
"^[a-z][a-z0-9_]*$" : {
"type" : ["object", "string", "array"],
"uniqueItems": true,
"additionalProperties" : false,
"properties" : {
"type" : {
"type" : "string",
"pattern" : "^any|boolean|integer|number|string|map|array|[A-Z][a-zA-Z0-9]+$"
},
"default" : {
"type" : [ "boolean", "integer", "number", "string", "object", "array", "null" ]
},
"desc" : {
"type" : "string",
"description" : "Parameter description"
}
}
}
},
"description" : "List of allowed parameter key-value pairs"
},
"result" : {
"additionalProperties" : false,
"patternProperties" : {
"^[a-z][a-z0-9_]*$" : {
"type" : ["object", "string", "array"],
"uniqueItems": true,
"additionalProperties" : false,
"properties" : {
"type" : {
"type" : "string",
"pattern" : "^any|boolean|integer|number|string|map|array|[A-Z][a-zA-Z0-9]+$"
},
"desc" : {
"type" : "string",
"description" : "Result variable description"
}
}
}
},
"description" : "List of allowed result key-value pairs"
},
"rawupload" : {
"type" : "boolean",
"desc" : "If not set then arbitrary data upload is not allowed."
},
"rawresult" : {
"type" : "boolean",
"desc" : "If set then no FutoIn response is assumed. Arbitrary raw data is sent instead."
},
"throws" : {
"type" : "array",
"uniqueItems": true,
"description" : "List of associative error names, which can be triggered by function execution"
},
"heavy" : {
"type" : "boolean",
"desc" : "Mark request as \"heavy\" in terms processing"
},
"seclvl" : {
"type" : "string",
"desc" : "Minimum user authentication security level"
},
"desc" : {
"type" : "string",
"description" : "Interface Function description"
}
},
"description" : "Interface Function declaration"
}
}
},
"desc" : {
"type" : "string",
"description" : "Description of the interface"
},
"inherit" : {
"type" : "string",
"description" : "Name:version of interface to be inherited"
},
"imports" : {
"type" : "array",
"uniqueItems": true,
"description" : "Name:version of interface to be imported as a mixin"
},
"requires" : {
"type" : "array",
"description" : "List of conditions for interface operation",
"items" : {
"type" : "string",
"pattern" : "^AllowAnonymous|SecureChannel|BiDirectChannel|MessageSignature|[a-zA-Z0-9]+$"
},
"uniqueItems": true,
"additionalItems": false
}
}
}
Example:
{
"iface" : "futoin.event.receiver",
"version" : "0.1",
"funcs" : {
"onEvent" : {
"params" : {
"event" : {
"type" : "string",
"desc" : "Event name"
},
"data" : {
"default" : null,
"desc" : "Arbitrary event data"
},
"ref" : "string"
},
"desc" : "Asynchronously send event"
},
"reliableEvent" : {
"params" : {
"event" : {
"type" : "string",
"desc" : "Event name"
},
"data" : {
"default" : null,
"desc" : "Arbitrary event data"
}
},
"result" : {
"delivered" : {
"type" : "boolean",
"desc" : "Must be true, if completed normally"
}
},
"desc" : "Synchronously send event"
}
}
}
It is assumed that interface identifier (name) is unique and consists of several string tokens concatenated with dots ("."). Each token is small latin alpha-numeric sequence.
Example: "futoin.event.receiver", "futoin.event.poll"
The first part of identifier must reference related project domain name or be unique enough to avoid name clashing (e.g. trademark, reserved prefix, etc.).
Example: "example.com.interface", "example.org.namespace.interface"
Note: "futoin." interface prefix is reserved for official FutoIn project specs
Function names follow camelCase. Example: "someFunc", anotherFunc"
Note: "futoin" function prefix is reserved for internal purposes
Parameter and result variable names follow small_caps_with_underscore pattern. Example: "some_param", "some_result_value"
In many cases, domain-specific interfaces have a large universal subset and only a few domain-specific additional functions and/or function parameters.
Interface can inherit another interface. It should be possible to call any interface through its parent or any grandparent.
Inheritance is limited to:
Note: multiple interface inheritance is not supported at the moment
Unfortunately, due to Executor's interface selection logic. The same base iface must not be used for inheritance of more than one derived interface within the same Executor instance. The primary use of inheritance feature is to create reusable base implementation logic with customized extensions possible through derived interface.
If only the interface itself, but not the implementation logic needs to be re-used then mixin/import feature is appropriate solution.
Some interfaces must be restricted to certain conditions. This can be defined on interface level through "requires" attribute.
Standard requirement type:
For safety reasons, inheriting interface must re-define all "requires" items from inherited interface.
For all publicly released specs, there must be associated repository. Repository must have two identical in structure folder trees "draft" and "final".
Each tree must have:
Both "meta" and "preview" folders must have files in the following format:
Note: {minor} should not include DV prefix
Note: as a convention, repository domain name should start from "specs." and be available through HTTP and/or HTTPS
It is assumed that automatic meta file retrieval first looks in final/meta/ and then tries draft/meta/. So, application source will not need to be changed during development of new spec and after release of the spec. However, all draft specs are subject to change without version update. So, all draft specs should be cached with small Time-To-Live or not cached at all.
Each interface must define "ftn3rev" field in standard MAJOR.MINOR version format. When the field is missing, FTN3 revision 1.0 is assumed.
Invoker part must allow loading interface definition only if major version is supported, regardless of minor version.
Executor part must allow loading interface only if specified FTN3 spec revision is fully supported.
Interface mixin is appropriate solution when only interface definition needs to be re-used, but the logic behind is absolutely different. Example: CRUDL-like interface.
Mixin interfaces are defined using "imports" field - an array of imported "iface:version" identifiers.
Import procedure must act exactly as inheritance in scope of processing "types", "funcs" and "requires" fields. However, imported interface must never be listed as inherited.
If imported interfaces includes own "imports" field it must be treated as if imported interfaces are listed in the top-most main interface. Interface imports of compatible interface versions must get merged together. This is a workaround for diamond-shaped cases.
Some request functions can be marked as "heavy". Executor implementation may use this meta- information to limit number of concurrent "heavy" requests for stability and performance reasons. Heavy requests may also get a different default timeout value.
=END OF SPEC=