FTN12: FutoIn Async API
Version: 1.10
Date: 2017-12-06
Copyright: 2014-2017 FutoIn Project (http://futoin.org)
Authors: Andrey Galkin

CHANGES

1. Concept

This interface was born as a secondary option for executor concept. However, it quickly became clear that async/reactor/proactor/light threads/etc. should be base for scalable high performance server implementations, even though it is more difficult for understanding and/or debugging. Traditional synchronous program flow becomes an addon on top of asynchronous base for legacy code and/or too complex logic.

Program flow is split into non-blocking execution steps, represented with execution callback function. Processing Unit (eg. CPU) halting/ spinning/switching-to-another-task is seen as a blocking action in program flow.

Any step must not call any of blocking functions, except for synchronization with guaranteed minimal period of lock acquisition. Note: under minimal period, it is assumed that any acquired lock is immediately released after action with O(1) complexity and no delay caused by programmatic suspension/locking of executing task

Every step is executed sequentially. Success result of any step becomes input for the following step.

Each step can have own error handler. Error handler is called, if AsyncSteps.error() is called within step execution or any of its sub-steps. Typical behavior is to ignore error and continue or to make cleanup actions and complete job with error.

Each step can have own sequence of sub-steps. Sub-steps can be added only during that step execution. Sub-step sequence is executed after current step execution is finished.

If there are any sub-steps added then current step must not call AsyncSteps.success() or AsyncSteps.error(). Otherwise, InternalError is raised.

It is possible to create a special "parallel" sub-step and add independent sub-steps to it. Execution of each parallel sub-step is started all together. Parallel step completes with success when all sub-steps complete with success. If error is raised in any sub-step of parallel step then all other sub-steps are canceled.

Out-of-order cancel of execution can occur by timeout, execution control engine decision (e.g. Invoker disconnect) or failure of sibling parallel step. Each step can install custom on-cancel handler to free resources and/or cancel external jobs. After cancel, it must be safe to destroy AsyncSteps object.

AsyncSteps must be used in Executor request processing. The same [root] AsyncSteps object must be used for all asynchronous tasks within given request processing.

AsyncSteps may be used by Invoker implementation.

AsyncSteps must support derived classes in implementation-defined way. Typical use case: functionality extension (e.g. request processing API).

For performance reasons, it is not economical to initialize AsyncSteps with business logic every time. Every implementation must support platform-specific AsyncSteps cloning/duplicating.

1.1. Levels

When AsyncSteps (or derived) object is created all steps are added sequentially in Level 0 through add() and/or parallel(). Note: each parallel() is seen as a step.

After AsyncSteps execution is initiated, each step of Level 0 is executed. All sub-steps are added in Level n+1. Example:

add() -> Level 0 #1
    add() -> Level 1 #1
        add() -> Level 2 #1
        parallel() -> Level 2 #2
        add() -> Level 2 #3
    parallel() -> Level 1 #2
    add() -> Level 1 #3
parallel() -> Level 0 #2
add() -> Level 0 #3

Execution cannot continue to the next step of current Level until all steps of higher Level are executed.

The execution sequence would be:

Level 0 add #1
Level 1 add #1
Level 2 add #1
Level 2 parallel #2
Level 2 add #3
Level 1 parallel #2
Level 1 add #3
Level 0 parallel #2
Level 0 add #3

1.2. Error handling

Due to not linear programming, classic try/catch blocks are converted into execute/onerror. Each added step may have custom error handler. If error handler is not specified then control passed to lower Level error handler. If non is defined then execution is aborted.

Example:

add( -> Level 0
    func( as ){
        print( "Level 0 func" )
        add( -> Level 1
            func( as ){
                print( "Level 1 func" )
                as.error( "myerror" )
            },
            onerror( as, error ){
                print( "Level 1 onerror: " + error )
                as.error( "newerror" )
            }
        )
    },
    onerror( as, error ){
        print( "Level 0 onerror: " + error )
        as.success( "Prm" )
    }
)
add( -> Level 0
    func( as, param ){
        print( "Level 0 func2: " + param )
        as.success()
    }
)

Output would be:

Level 0 func
Level 1 func
Level 1 onerror: myerror
Level 0 onerror: newerror
Level 0 func2: Prm

In synchronous way, it would look like:

variable = null

try
{
    print( "Level 0 func" )

    try
    {
        print( "Level 1 func" )
        throw "myerror"
    }
    catch ( error )
    {
        print( "Level 1 onerror: " + error )
        throw "newerror"
    }
}
catch( error )
{
    print( "Level 0 onerror: " + error )
    variable = "Prm"
}

print( "Level 0 func2: " + variable )

1.2.1. Steps in error handler

Very often, error handler creates an alternative complex program path which requires own async operation. Therefore, error handler must accept as.add() as implicit as.success().

If steps are added inside error handler they must remain on the same async stack level while error handler itself gets removed.

Example:

add( -> Level 0
    func( as ){
        print( "Level 0 func" )
        add( -> Level 1
            func( as ){
                print( "Level 1 func" )
                as.error( "first" )
            },
            onerror( as, error ){
                print( "Level 1 onerror: " + error )
                as.add( -> Level 2
                    func() {
                        print( "Level 2 func" )
                        as.error( "second" );
                    },
                    onerror( as, error ) {
                        print( "Level 2 onerror: " + error )
                    }
                )
            }
        )
    },
    onerror( as, error ){
        print( "Level 0 onerror: " + error )
    }
)

Output would be:

Level 0 func
Level 1 func
Level 1 onerror: first
Level 2 func
Level 2 onerror: second
Level 0 onerror: second

Note: "Level 1 onerror" is not executed second time!

1.3. Wait for external resources

Very often, execution of step cannot continue without waiting for external event like input from network or disk. It is forbidden to block execution in event waiting. As a solution, there are special setTimeout() and setCancel() methods.

Example:

add(
    func( as ){
        socket.read( function( data ){
            as.success( data )
        } )

        as.setCancel( function(){
            socket.cancel_read()
        } )

        as.setTimeout( 30_000 ) // 30 seconds
    },
    onerror( as, error ){
        if ( error == timeout ) {
            print( "Timeout" )
        }
        else
        {
            print( "Read Error" )
        }
    }
)

1.4. Parallel execution abort

Definition of parallel steps makes no sense to continue execution if any of steps fails. To avoid excessive time and resources spent on other steps, there is a concept of canceling execution similar to timeout above.

Example:

as.parallel()
    .add(
        func( as ){
            as.setCancel( function(){ ... } )

            // do parallel job #1
            as.state()->result1 = ...;
        }
    )
    .add(
        func( as ){
            as.setCancel( function(){ ... } )

            // do parallel job #1
            as.state()->result2 = ...;
        }
    )
    .add(
        func( as ){
            as.error( "Some Error" )
        }
    )
as.add(
    func( as ){
        print( as.state()->result1 + as.state->result2 )
        as.success()
    }
)

1.5. AsyncSteps cloning

In long living applications the same business logic may be re-used multiple times during execution.

In a REST API server example, complex business logic can be defined only once and stored in a kind of AsyncSteps object repository. On each request, a reference object from the repository would be copied for actual processing with minimal overhead.

However, there would be no performance difference in sub-step definition unless its callback function is also created at initialization time, but not at parent step execution time (the default concept). So, it should be possible to predefine those as well and copy/inherit during step execution. Copying steps must also involve copying of state variables.

Example:

AsyncSteps req_repo_common;
req_repo_common.add(func( as ){
    as.add( func( as ){ ... } );
    as.copyFrom( as.state().business_logic );
    as.add( func( as ){ ... } );
});

AsyncSteps req_repo_buslog1;
req_repo_buslog1
    .add(func( as ){ ... })
    .add(func( as ){ ... });

AsyncSteps actual_exec = copy req_repo_common;
actual_exec.state().business_logic = req_repo_buslog1;
actual_exec.execute();

However, this approach only make sense for deep performance optimizations.

1.6. Implicit as.success()

If there are no sub-steps added, no timeout set and no cancel handler set then implicit as.success() call is assumed to simplify code and increase efficiency.

as.add(func( as ){
    doSomeStuff( as );
})

As in many cases it's required to wait for external event without any additional conditions, the general approach used to be adding an empty cancel handler. To avoid that, an explicit .waitExternal() API is available.

1.7. Error Info, Last Exception and Async Call Stack

Pre-defined state variables:

Error code is not always descriptive enough, especially, if it can be generated in multiple ways. As a convention special "error_info" state field should hold descriptive information of the last error. Therefore, as.error() is extended with optional parameter error_info.

"last_exception" state variables may hold the last exception object caught, if feasible to implement. It should be populated with FutoIn errors as well.

1.8. Async Loops

Almost always, async program flow is not linear. Sometimes, loops are required.

Basic principals of async loops:

    as.loop( func( as ){
        call_some_library( as );
        as.add( func( as, result ){
            if ( !result )
            {
                // exit loop
                as.break();
            }
        } );
    } )

Inner loops and identifiers:

    // start loop
    as.loop( 
        func( as ){
            as.loop( func( as ){
                call_some_library( as );
                as.add( func( as, result ){
                    if ( !result )
                    {
                        // exit loop
                        as.continue( "OUTER" );
                    }

                    as.success( result );
                } );
            } );

            as.add( func( as, result ){
                // use it somehow
                as.success();
            } );
        },
        "OUTER"
    )

Loop n times.

    as.repeat( 3, func( as, i ){
        print( 'Iteration: ' + i )
    } )

Traverse through list or map:

    as.forEach(
        [ 'apple', 'banana' ],
        func( as, k, v ){
            print( k + " = " + v )
        }
    )

1.8.1. Termination

Normal loop termination is performed either by loop condition (e.g. as.forEach(), as.repeat()) or by as.break() call. Normal termination is seen as as.success() call.

Abnormal termination is possible through as.error(), including timeout, or external as.cancel(). Abnormal termination is seen as as.error() call.

1.9. The Safety Rules of libraries with AsyncSteps interface

  1. as.success() should be called only in top-most function of the step (the one passed to as.add() directly)
  2. setCancel() and/or setTimeout() must be called only in top most function as repeated call overrides in scope of step

1.10. Reserved keyword name clash

If any of API identifiers clashes with reserved word or has illegal symbols then implementation-defined name mangling is allowed, but with the following guidelines in priority.

Pre-defined alternative method names, if the default matches language-specific reserved keywords:

1.11. Synchronization

1.11.1. Mutual exclusion

As with any multi-threaded application, multi-step cases may also require synchronization to ensure not more than N steps enter the same critical section.

Implemented as Mutex class.

1.11.2. Throttling

For general stability reasons and protection of self-DoS, it may be required to limit number of steps allowed to enter critical section within time period.

Implemented as Throttle class.

1.11.3. API details

A special .sync(obj, step, err_handler) API is available to synchronize against any object supporting synchronization protocol .sync(as, step, err_handler).

Synchronization object is allowed to add own steps and is responsible for adding request steps under protection of provided synchronization. Synchronization object must correctly handle canceled execution and possible errors.

Incoming success parameters must be passed to critical section step. Resulting success parameters must be forwarded to the following steps like there is no critical section logic.

1.11.4. Re-entrancy requirements

All synchronization implementations must either allow multiple re-entrancy of the same AsyncSteps instance or properly detect and raise error on such event.

All implementations must correctly detect parallel flows in scope of single AsyncSteps instance and treat each as separate one. None of paralleled steps should inherit lock state of parent step.

1.11.5. Deadlock detection

Deadlock detection is optional and is not mandatory required.

1.11.6. Max queue limits

It may be required to limit maximum number of pending AsyncSteps flows. If overall queue limit is reached then new entries must get "DefenseRejected" error.

1.11.7. Processing limits

Request processing stability requires to limit both simultaneous connections and request rate. Therefore a special synchronization primitive Limiter wrapping Mutex and Throttle is introduced to impose limits in scope.

2. Async Steps API

2.1. Types

2.2. Functions

It is assumed that all functions in this section are part of single AsyncSteps interface. However, they are grouped by semantical scope of use.

2.2.1. Common API - can be used in any context

  1. AsyncSteps add( execute_callback func[, error_callback onerror] )
  2. AsyncSteps parallel( [error_callback onerror] )
  3. Map state()
  4. get/set/exists/unset wildcard accessor, which map to state() variables
  5. AsyncSteps copyFrom( AsyncSteps other )
  6. clone/copy c-tor - implementation-defined way of cloning AsyncSteps object
  7. AsyncSteps sync(ISync obj, execute_callback func[, error_callback onerror] )

2.2.2. Execution API - can be used only inside execute_callback

Note: success() and error() can be used in error_callback as well

  1. void success( [result_arg, ...] )
  2. DEPRECATED: void successStep()
  3. void error( name [, error_info] )
  4. void setTimeout( timeout_ms )
  5. call operator overloading
  6. void setCancel( cancel_callback oncancel )
  7. void waitExternal()

2.2.3. Control API - can be used only on Root AsyncSteps object

  1. execute() - must be called only once after root object steps are configured.
  2. cancel() - may be called on root object to asynchronously cancel execution

2.2.4. Execution Loop API - can be used only inside execute_callback

  1. void loop( func, [, label] )
  2. void forEach( map|list, func [, label] )
  3. void repeat( count, func [, label] )
  4. void break( [label] )
  5. void continue( [label] )

2.3. Mutex class

2.4. Throttle class

2.5. Limiter class

3. Examples

In pseudo-code.

3.1. Single-level steps

AsyncStepsImpl as;

as.add(
    function( inner_as ){
        if ( something )
            inner_as.success( 1, 2 )
        else
            inner_as.error( NotImplemented )
    },
    function( inner_as, error ){
        externalError( error );
    }
).add(
    function( inner_as, res1, res2 ){
        externalSuccess( res1, res2 );
    },
)

3.2. Sub-steps

AsyncStepsImpl as;

as.add(
    function( inner_as ){
        inner_as.add(
            function( inner2_as ){
                if ( something )
                    inner2_as.success( 1 )
                else
                    inner2_as.error( NotImplemented )
            },
            function( inner2_as, error )
            {
                log( "Spotted error " + error )
                // continue with higher level error handlers
            }
        )
        inner_as.add(
            function( inner2_as, res1 ){
                inner2_as.success( res1, 2 )
            }
        )
    },
    function( inner_as, error ){
        externalError( error );
    }
).add(
    function( inner_as, res1, res2 ){
        externalSuccess( res1, res2 );
    },
)

3.3. parallel() steps and state()

AsyncStepsImpl as;

as.add(
    function( inner_as ){
        inner_as.parallel().add(
            function( inner2_as ){
                inner2_as.state().parallel_1 = 1;
            },
            function( inner2_as, error )
            {
                log( "Spotted error " + error )
                // continue with higher level error handlers
            }
        ).add(
            function( inner2_as ){
                inner2_as.state().parallel_2 = 2;
            },
            function( inner2_as, error )
            {
                inner2_as.state().parallel_2 = 0;
                // ignore error
            }
        )
    },
    function( inner_as, error ){
        externalError( error );
    }
).add(
    function( inner_as, res1, res2 ){
        externalSuccess(
            as.state().parallel_1,
            as.state().parallel_2
        );
    },
)

3.4. loops

AsyncStepsImpl as;

as.add(
    function( as ){
        as.repeat( 3, function( as, i ) {
            print i;
        } );

        as.forEach( [ 1, 3, 3 ], function( as, k, v ) {
            print k "=" v;
        } );

        as.forEach( as.state(), function( as, k, v ) {
            print k "=" v;
        } );
    },
)

3.5. External event wait

AsyncStepsImpl as;

as.add(
    function( as ){
        as.waitExternal();

        callSomeExternal( function(err) {
            if (err)
            {
                try {
                    as.error(err);
                } catch {
                    // ignore
                }
            }
            else
            {
                as.success();
            }
        } );
    },
)

3.6. Synchronization

AsyncStepsImpl as;
MutexImpl mutex(10);

as.sync(
    mutex,
    function( as ){
        // critical section with regular AsyncSteps
    },
)

=END OF SPEC=